Digital photography - http://karedigital.com

Dslr Hard Case - Camera and




   Dslr Hard Case - 207 items found  View more items

Camera and Photo Accessories Directory

Amazon.com : AmazonBasics Holster Camera Case for DSLR ...
AmazonBasics Holster Camera Case for DSLR Cameras - Black Experience a camera case that will keep up with your quest for capturing great shots with this sleek ...

DIY Camera Hard Case - DIY Photography
In this post, Kevin A Crider will show you how to make a DIY Hard Camera Case the size of a suitcase. And yes, you can get a pro, feature rich version for $800, but ...

Amazon.com : Nikon D3300 DX-format DSLR Kit w/ 18-55mm DX ...
Amazon.com : Nikon D3300 DX-format DSLR Kit w/ 18-55mm DX VR II & 55-200mm DX VR II Zoom Lenses and Case (Black) : Camera & Photo

Tether Tools' Case Relay provides continuous power for ...
The Case Relay Camera Power System from Tether Tools offers 'infinite camera power' for most DSLR and mirrorless cameras from Canon, Nikon, Sony and Panasonic.

camera case | eBay
Find great deals on eBay for camera case camera bag. Shop with confidence.


ADVANCED PRODUCT FINDER

    Don't see what you're looking for?

Editor's picks

  • SKB-Cases

    SKB Cases 3I-13096SLR1 SKB iSeries Camera Cases for DSLR with Attached Lens, Lens Pockets and Accessories (Black)

    Photography (SKB-Cases)

    SKB's iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof, submersible design
    Molded-in hinges, patented "trigger release" latch system
    Snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.
    Resistant to corrosion and impact damage
    Lifetime Guarantee


  • Pelican Products

    Pelican 1200 Case with Foam for Camera (Black)

    Photography (Pelican Products)

    Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.
    Interior Dimensions (inches): 9.25 x 7.12 x 4.12
    Pelican's Pick N'Pluck foam lets you customize the interior.
    Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.
    Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.
    Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.
    Single folding front handle
    Pelican's Pick N'Pluck foam lets you customize the interior.


  • Pelican Products

    Pelican 1510-004-110 Case with Padded Dividers, Black

    Photography (Pelican Products)

    Strong polyurethane wheels with stainless steel bearings
    Waterproof, crush-proof and dust-proof
    Stainless steel ball bearing wheels
    Watertight with Automatic Pressure Equalization Valve
    FAA maximum carry-on size
    Easy open double throw latches
    Reinforced padlock protectors
    Single Layer padded dividers with Velcro adjustments
    Retractable extension handle


  • CIRCUIT-TEST

    IBEX Cases - Black Watertight Carry On Hard Rugged Protective Case with Wheels and Handle for Electronics, Equipment, Cameras, Tools, Drones, and More (IC-1800BKW)

    Photography (CIRCUIT-TEST)
    List Price: $199.99
    Price: $169.99
    You Save: $30.00 (15%)

    IBEX Cases are dustproof, watertight, and temperature resistant from -20°C to 80°C (-4°F to 176°F). Pressure Release Valves are also present on all cases to protect pressure sensitive instruments
    Retractable extension handle and durable replaceable wheels. Available in black or yellow. Interior Dimensions L x W x H: 20.1 x 11.5 x 6.8" (510 x 292 x 174mm)
    The injection molded polypropylene IBEX Case are dustproof, watertight, and temperature resistant from -20°C to 80°C (-4°F to 176°F). Pressure Release Valves are also present on all cases to protect pressure sensitive instruments
    Dual padlock hasps provide a dedicated location for locks to secure your valuables
    Two wave foams and two pre-cut cubed foams are included with the case to provide a fully removable and customizable interior for your electronics, equipment, tools, cameras, drones, GoPro, and other contents


  • Pelican Products

    Pelican 1120 Case with Foam for Camera (Black)

    Photography (Pelican Products)

    Rating (191 reviews):
    (4.9/5)
    Pelican Products

    Perfect for a GoPro

    5/5 Jennifer Surber - See all my reviews Verified Purchase(What's this?) This review is from: Pelican 1120 Case with Foam for Camera (Black) (Camera) I bought this for my GoPro Hero3+ and it's a perfect fit. Love how you can customize the fit by removing the foam blocks. Feels super sturdy and protective. This is the way to go if you don't need to bring along any extra accessories. Really just room for the camera, batteries, and charger., August 13, 2014

    Bought for small firearm

    4/5 Justin - See all my reviews Verified Purchase(What's this?) This review is from: Pelican 1120 Case with Foam for Camera (Black) (Camera) I will add to the reviews for this case as a firearm case. I bought this for my S&W Shield 9mm (which is a small gun) and it just barely fits.... I would not recommend this to anyone for a gun case because it left about a 1/8"-1/4" of foam between the wall and the gun. Spend the extra cash and go with a larger case. I was able to stuff the gun and two magazines into the case but it is very snug. I think the only gun that would fit half way decent in this case would be a small revolver. Help other customers find the most helpful reviews  Was this review helpful to you? , May 29, 2014

    Pelican 1120 perfect for a GoPro

    5/5 Ben H. - See all my reviews Verified Purchase(What's this?) This review is from: Pelican 1120 Case with Foam for Camera (Black) (Camera) Holds my two go pros vertically and the remote and battery charger with two batteries in it as well as a cable and sd card adapter perfectly. It doesnt have room for accessories though. I have a lot so those have their own bag. I didnt want a huge container so this is perfect. It fits easily in my backpack for traveling or excursions. I can just bring what accessories i need and leave the rest in the car or hotel room when traveling., March 28, 2015
    Automatic pressure equalization valve keeps water out
    Customizable Pick 'n' Pluck foam interior, dustproof
    Sturdy camera case made using copolymer polypropylene
    Crushproof open-cell core and solid-wall construction


  • CASEMATIX

    TOUGH-XL Hard-Body Travel and Storage Case Camera , Gear , Equipment and Lenses - Protects Nikon Digital SLR dSLR D3300 / D3200 / D750 / D7100 / D810 / D3100 / D5500 / D7200 / D7000 and more

    Photography (CASEMATIX)
    List Price: $59.99
    Price: $39.99
    You Save: $20.00 (33%)

    Additional features include: 4 standard-sized padlock rings, stackable design for multi-case storage, highly durable hinges and easy-close latches
    Durability and Manufacturing Integrity Unconditionally Guaranteed by CASEMATIX
    Made in the United States with Pride and Care
    Provides hard exterior protection, and dense interior cushion for storing or traveling with your high value camera equipment and accessories
    LARGE SIZE, HIGH VALUE: external dimensions at 16.0" x 13.0" x 6.0", with total usable interior space at 13.0" x 10.0" x 4.0"


  • CASE LOGIC

    Case Logic SLRC-206 SLR Camera and 15.4-Inch Laptop Backpack (Black)

    Photography (CASE LOGIC)

    Water-proof EVA base withstands the elements and allows the backpack to stand up on its own
    Memory foam on interior of backpack lid helps protect your delicate LCD screen
    Patent pending hammock system suspends your SLR above the bottom of case, providing superior impact protection
    Patent pending hammock system suspends your SLR above the bottom of case, providing superior impact protection
    Fits Laptops dimensions: 15.4-Inch x 10.4-Inch x 1-Inch
    Backpack holds SLR camera body with attached zoom lens, laptop and additional accessories
    Memory foam on interior of backpack lid helps protect your delicate LCD screen
    Water-proof EVA base withstands the elements and allows the backpack to stand up on its own
    Backpack holds SLR camera body with attached zoom lens, laptop and additional accessories
    Fits Laptops dimensions: 15.4-Inch x 10.4-Inch x 1-Inch


  • SKB-Cases

    SKB Cases 3I-0907-6SLR iSeries Case for DSLR Cameras (Black)

    Photography (SKB-Cases)

    Patent pending "trigger release" latch system
    Resistant to corrosion and impact damage
    Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
    UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
    Ultra high-strength polypropylene copolymer resin


  • Sakar

    Vivitar VHC1800 Professional Hard Case with Foam for SLR/DSLR Camera & Camcorder

    Photography (Sakar)

    Rating (15 reviews):
    (4.1/5)
    Sakar

    For the price, it does the job.

    There appears to be 3 cases that are very similar. I took a chance with this one as I didn't have interior dimensions of the other 2 at the time of ordering. I'm guessing all the cases are very similar.As with the other cases, this case has a clean look to it, but durability, I don't believe it will hold up against alot of stress. I would handle the case with kid gloves and not put too much pressure on it.The latch system is really only held up by a small notch and thin metal tab. Not sure if the other cases have a groove for the latch to clamp onto, but this does not. I would not recommend shoving too much into the case to where it bows out to the point the metal tab doesn't sit deep enough to hold.This case has a layer of foam glued to the bottom and egg crate type foam glued to the top lid. There's about 2 1/4" pull and pluck foam. There is only one layer of this. Followed by a thin sheet of foam on top.The foam is pretty thin... 4/5 Tech Nurse (Newark, DE) - See all my reviews Verified Purchase(What's this?) This review is from: Vivitar VHC1800 Professional Hard Case with Foam for SLR/DSLR Camera & Camcorder (Electronics) There appears to be 3 cases that are very similar. I took a chance with this one as I didn't have interior dimensions of the other 2 at the time of ordering. I'm guessing all the cases are very similar.As with the other cases, this case has a clean look to it, but durability, I don't believe it will hold up against alot of stress. I would handle the case with kid gloves and not put too much pressure on it.The latch system is really only held up by a small notch and thin metal tab. Not sure if the other cases have a groove for the latch to clamp onto, but this does not. I would not recommend shoving too much into the case to where it bows out to the point the metal tab doesn't sit deep enough to hold.This case has a layer of foam glued to the bottom and egg crate type foam glued to the top lid. There's about 2 1/4" pull and pluck foam. There is only one layer of this. Followed by a thin sheet of foam on top.The foam is pretty thin... Read more, January 3, 2013

    NO, don't do it -- cheap AND small!!

    Wow -- an amazing piece of junk. Basically pressed cardboard with a thin black plastic layer of film. I guess that's the "heavy duty ABS". I wouldn't even call this case heavy duty cardboard. Metal trim and fasteners couldn't hold up to stiff breeze. It's almost like a kid's Halloween prop it's so cheaply made. About the same gauge metal as a soda can.Received as gift after telling someone I needed a "good carrying case". Can't possibly tell them what waste of time, space, money and cardboard this is. Will send it back anyway just to get them a refund.Notice dimensions are not clearly stated -- that's for a reason. Reality is that it's a third as small as it looks in pic. Just over a foot in length.Okay, I've wasted enough time on this but I just want you to avoid the same mistake. Don't even consider buying it. One star is being generous. Can't give zero.PS -- shipped by some place named "accessorygenie" dot com so I'd just... 1/5 Nick - See all my reviews Wow -- an amazing piece of junk. Basically pressed cardboard with a thin black plastic layer of film. I guess that's the "heavy duty ABS". I wouldn't even call this case heavy duty cardboard. Metal trim and fasteners couldn't hold up to stiff breeze. It's almost like a kid's Halloween prop it's so cheaply made. About the same gauge metal as a soda can.Received as gift after telling someone I needed a "good carrying case". Can't possibly tell them what waste of time, space, money and cardboard this is. Will send it back anyway just to get them a refund.Notice dimensions are not clearly stated -- that's for a reason. Reality is that it's a third as small as it looks in pic. Just over a foot in length.Okay, I've wasted enough time on this but I just want you to avoid the same mistake. Don't even consider buying it. One star is being generous. Can't give zero.PS -- shipped by some place named "accessorygenie" dot com so I'd just... Read more Help other customers find the most helpful reviews  Was this review helpful to you? , August 9, 2013

    Expected better from a "name brand"

    item is made by a "brand name" manufacturer so I thought it would be good. First, the good. Case seems sturdy enough, latches are good for a light or medium load. The bad, first, the dividers are too short. No matter the configuration I could not get the dividers to section correctly. It was like a bad Tetris puzzle.. Next, the foam. The foam seems to be of a good density, but when seperating the cube to fit items the other cubes come with it easily. By the time you get the foam notched for the item you want you have taken other foam with it and rendered your 'tight fit" useless. When you get it right only removing the items once or twice and other cubes start coming with it. Also, if they would have perferated the cubes in half it would help. Next, the egg crate on the top and the foam cover still do not hold smaller items in place. Just moving the box from horizontal to upright and even tight fitting items were loose and clunking. I plan on refoaming the... 2/5 David Kiefer - See all my reviews Verified Purchase(What's this?) This review is from: Vivitar VHC1800 Professional Hard Case with Foam for SLR/DSLR Camera & Camcorder (Electronics) item is made by a "brand name" manufacturer so I thought it would be good. First, the good. Case seems sturdy enough, latches are good for a light or medium load. The bad, first, the dividers are too short. No matter the configuration I could not get the dividers to section correctly. It was like a bad Tetris puzzle.. Next, the foam. The foam seems to be of a good density, but when seperating the cube to fit items the other cubes come with it easily. By the time you get the foam notched for the item you want you have taken other foam with it and rendered your 'tight fit" useless. When you get it right only removing the items once or twice and other cubes start coming with it. Also, if they would have perferated the cubes in half it would help. Next, the egg crate on the top and the foam cover still do not hold smaller items in place. Just moving the box from horizontal to upright and even tight fitting items were loose and clunking. I plan on refoaming the... Read more Help other customers find the most helpful reviews  Was this review helpful to you? , April 11, 2013
    Detachable and adjustable shoulder strap
    Heavy duty ABS hard-sided case
    Heavy duty removable high density diced foam
    Inside dimensions 12 3/8x 9 5/8x 4 1/2"
    5 Removable dividers
    The perfect choice to protect your digital SLRs, camcorders, and photographic equipment
    Outside dimensions 13x 10 1/4x 5 1/8"


  • SKB-Cases

    SKB Cases 3I-20117SLR2 SKB iSeries Camera Cases 2 DSLR with Lenses (Black)

    Photography (SKB-Cases)

    Rating (9 reviews):
    (5.0/5)
    SKB-Cases

    This ia a fantastic product for the price

    5/5 Thomas N. Gilmore (Florida) - See all my reviews Verified Purchase(What's this?) This review is from: SKB Cases 3I-20117SLR2 SKB iSeries Camera Cases 2 DSLR with Lenses (Black) (Electronics) This ia a fantastic product for the price! I have a Canon 6D and 60D that both fit in the custom foam plus several lenses and accessories. This is an extremely well built product. I'm getting ready to go on a photo shoot and needed a good travel suitcase that is water proof. Help other customers find the most helpful reviews  Was this review helpful to you? , January 17, 2015

    I love this case

    5/5 Diane Buhre - See all my reviews Verified Purchase(What's this?) This review is from: SKB Cases 3I-20117SLR2 SKB iSeries Camera Cases 2 DSLR with Lenses (Black) (Electronics) I love, love this case, it holds all my camera equipment, (2 Nikon DLRs and three lenses +) . It's really, really well made and I wouldn't think twice about checking it in as baggage because the equipment is so secure. It's one of the best purchases I've ever made. Help other customers find the most helpful reviews  Was this review helpful to you? , February 22, 2015

    Easy to carry and load

    5/5 Mark A Lockett - See all my reviews Verified Purchase(What's this?) This review is from: SKB Cases 3I-20117SLR2 SKB iSeries Camera Cases 2 DSLR with Lenses (Black) (Electronics) This case is incredible! Fits 2 full DSLR units, with plenty of slots for other equipment, lenses, batteries, cards, audio pre's etc. Easy to carry and load, and looks incredibly professional. Help other customers find the most helpful reviews  Was this review helpful to you? , January 26, 2016
    Molded-in hinges, patented "trigger release" latch system
    Snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.
    Lifetime Guarantee
    Resistant to corrosion and impact damage
    SKB's iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof, submersible design


Camera and Photo Accessories